Read posts 429 and 431 and be sure you have the languages files (see post 544)

If you want I will fill in MioPocket 3.0 altered by me or try to understand...

http://www.gpspassion.com/forumsen/topi ... _ID=126303

okay i have a navigon 2100max and i want to get the build 7.4 build 648 (last version that works with Traffic Alert) i currently have 6.5

what files exactly do i need for that??? i see on the first page build 648 is available but only for 320 x 240, my device is 480 x 272. Plus it says i need to add my own audio files and its starting to confuse me please help and fill me in on what exactly i need to do

Hello DMANN,

I installed your version 7.4.3, it's running but for the TMC the frequency blocked to 91.3 MHZ. I modified the file UserSettings. Default as you notified above.

On your version 7.3.7 (without MyRoute), for the TMC the frequency find station and the tmc symbol changed state.

The TMC behaviour of the version 7.4.3, it's normal?

Thx.

Thanks very much for the offer DMANN but I think I have it working now.

Now I've conquered most of the issues and I'm running the 7.4.0-version (build 789) with Q2_2009-maps with almost no problems. The program itself is stable and works well however still one problem remains. My Loox n100 is unable to get gps-signal =/ there is no even gps-antenna logo on the screen like there was with mn6. I've changed the gps port and baudrate settings but still nothing. What settings have you modified to make the gps work like it should? As I've understood; there shouldn't be any problems running Q2_2009 maps with mn7.4.0, am I correct? Could someone please give me the exact modifications for n100, please?

Hi, thanks DMANN! I'm very curious to know what's behind that link cause it seems to be just what I'm looking for. Unfortunately I understand only few words of germany and most of all the forum to which the link pointed requires registration. That wouldn't be a problem normally but as far as I understood what I red the registration is currently disabled so there is no way for me to read it at the moment =/ Is there another way around? =)

BITTE SCHÖN !!!
MN7 (7.4.3) + TMC für Loox N100/110 Desktopfree!
Final Version 7.4.3 Build 793
TTS-Problem gefixt (THX to rroger!), Speicheroptimierungen im MN7 vorgenommen, TTS Stimme mit im Paket.
Maps Q2/2009 müssen noch hinzugefügt werden, ggf. zusätzliche Stimmen.
Ansonsten fehlt nichts.
Version 7.4.3 + Exit Button + Q2/2009 Steuerdateien + N110 Ready + 06/2009 Blitzerdatei + German Sounds dabei.

 http://rapidshare.com/files/254643287/M ... AN_TMC.rar
Pass: 4gulli

Danke Schön! / Thank You very much! =)

Just started to download it... hope it works, I'll let you know. Thanks again very much, I'll appreciate your effort! =)

1 try with the aerial
2 check up options (TMC Settings-Tuning Mode- Automatic)
3 There is no it not normally...

Hi,

Now I'm a littlebit confused... I thought that in that package would be new systemfiles (mn7.4.3) but all I could find were files that propably have something to do TMC working in Germany. No systemfiles or anything that would have helped me, only german soundfiles, etc... Could you find the files that I need to update my PNA to make the gps function again? I think they are propably in the same source where you got these, but maybe you just packed wrong files?? Thank you anyway, but I hope that we can find a solution to this.

Unfortunately for me is not present Loox N100, and without it more anything I can not help...

Okay, No worries =) I'll just have to figure it out myself then... Thanks anyway =)
I know that some people that have written to this thread know how to make mn7 work in loox, so please upload a confiq-file or give some instructions! Would be nice to make that piece of navi to navigate =)



EDIT: the problem still remains after a long night of trying... I red from the navigon manual that if there is no GPS logo on the screen at all, the built-in GPS unit is not operational. So there must be some settings that can change this. The mn7.4.0 is unable to use the GPS unit at the moment but does someone know a way to tweak it to work? My current settings are:

UserSettings.default
<GPS>
<Type>2</Type>
<GPSPort>4</GPSPort>
<Baudrate>9600</Baudrate>
<DRVPrefix />
</GPS>


Coreconfig.ini

[Default Sensor Gps]
DataType=GPS
Connection=Default Sensor Gps Serial
Parser=Default Sensor Gps Parser

[Default Sensor Gps Serial]
ConnectionType=1
Port=3
BaudRate=38400
TimeOut=5


[Default MapMatcher]
IgnoreOneWay=0
GPSMode=2
MinMatchingDist=5

[Default Sensor Gps Parser]
AutoDetectEnabled=1
AutoReconnectTimeout=4000
AutoDetectTimeout=-1
ParserFormat1=GGA_RMC
ParserFormat2=GGA_VTG

Thx for your advices... but Tmc parameters is it not different for the France ?