good question! ( I am initial)
i've make lot of test and i'm lost

phonème and terrain are going in MAP?

no it still doen't work ... gggrrr

my advice is to redo all from scratch, reading carefully all the thread....

Hi!

Have anyone got a Navigon 2100 (not max) working with MN7 (v7.x.x) with following features:
-TMC (any) version.
-No freeze in standby mode.

I have tested almost all versions and settings to get it to work smooth, but with negative results.
Please, can someone explain why it doesn't work!

Hi. Try this SD-Ready Version for Navigon 21xx (NO max):

 http://rapidshare.com/files/244598429/M ... 3_2100.rar

Passwort: keypass

TMC won´t work on Navigon 2100 HW with MN7.x.x Versions. If you want TMC you have to use MN6.5.2. No Standby-Bug in above Version.

Try a newer Version of MN7.4.x, like MN7.4.1, with Memory-Tweak (Memory.exe in Autostart). Works like a charm on 21xx (but w/o TMC of course)!



Usersettings.xml:

<GPS>
<Type>2</Type>
<GPSPort>1</GPSPort>
<Baudrate>4800</Baudrate>
<TMCPort>4</TMCPort>
<DRVPrefix></DRVPrefix>
</GPS>

re:post 529; forget TMC in 2100 no max with Navigon 7.xx soft!
I,ve used the folowing version with some changes and the functionality is perfect as well as the layout!
"Hi. Try this SD-Ready Version for Navigon 21xx (NO max):
 http://rapidshare.com/files/244598429/M ... 3_2100.rar
Passwort: keypass"
The changes i´ve performed were as follows
1.in User settings:
<GPS>
<Type>2</Type>
<GPSPort>1</GPSPort>
<Baudrate>4800</Baudrate>
<TMCPort>4</TMCPort>
<DRVPrefix></DRVPrefix>
</GPS>
<TMC>
<RadioStationScan>0</RadioStationScan>
<AutoRecalculation>1</AutoRecalculation>
<PreferPay>1</PreferPay>
<TMCPort>4</TMCPort>
<TMCBaudrate>4800</TMCBaudrate>
<DRVPrefix>RDS</DRVPrefix>
in Application settings:
<ExitBehaviour>1</ExitBehaviour>
<USBModeExitBehaviour>4</USBModeExitBehaviour>
<SDCardInsertBehaviour>5</SDCardInsertBehaviour>
<SDCardRemovedExitBehaviour>5</SDCardRemovedExitBehaviour>
<DisclaimerExitBehaviour>5</DisclaimerExitBehaviour>
<NoGPSExitBehaviour>5</NoGPSExitBehaviour>
<MAPSelectionCancelBehaviour>1</MAPSelectionCancelBehaviour>
<PngGammaValue>2.2</PngGammaValue>
<MapHotFix>0</MapHotFix>
in core/core config:

[Default Sensor Gps Serial]
ConnectionType=2
Port=1
BaudRate=4800
TimeOut=5

I have used Maps eu Q1-09 for build 789

//thomas

Hello people
Someone know how to fix a bug in 2210 with this update, after the welcome screen and clic ok with the recommendations, there is a small buttor on the lower left, to put the device in standby. When i click there it simply reboot.
Anyone with the same bug?

Thanks to all

Hello guys
I tried to use PDA version on my HTC Touch. Navigon started on my pocket pc but when I am trying to navigate it shows some error message.
( Could not calculate route (472). Changes to the route profile might solve the problem.
Tap on 'option' > 'Route Profile' and select the following:
-moterways, Ferries, Toll Roads: ALLOW.
-Speed Profile: CAR )

I tried to change motorway, ferries and toll road;allowed but I can not see speed profile and car.

can someone help how this thing can me solve. I can not calculate the route and can not use navigator because of above problem. DO I need to change anything else. PLEASE HELP ME??

Thank you very much for that build\upload, i have a couple problems\questions...:
what is the proper coreconfig.ini and UserSettings.xml for 5100 or whatelse could i been missing because mine doesn't pick up GPS signal and keyboard is grayed out

Thanks in advance

I am also having the same problem, I am using the NA Q2 2009 maps, any ideas what could be the reason?

@ thetwo and vaghunger

my opinion about your problem is that some path is wrong or file is missing.
Try to open ApplicationSettingsPathes.xml with a text editor and check all the paths are in there.
Both of you are using NA maps ?
Are the ./Routing/US_*.ini present ?

Awesome I added that last line and it worked. Thanks a lot!

Now, I was also trying the giordio version and just after it starts up, it automatically closes/crashes, it shows the Navigon splash screen and then shows the menu for like a second and the program shuts down, do you know what could be causing that?

Try to change Hardwarelayer.dll with another one from other release...

Maybe that one of this can solve  http://rapidshare.com/files/245845461/several_HWl.zip

I tried using all the files you provided and even some others, but still the same thing, any more ideas?

Basically I am trying to use the build 648 because that is the one which works with the US Q2 maps on my PDA, the latest build 789 can detect the maps but it doesn't seem to interact with them, when I try searching for a destination or POI, the fields are blank and the keyboard is grayed out. Giordio's version has Panoramic 3D and the maps have the TMC files, so basically I am trying to get all the things working together. I had tried Giordio's version like a day ago and it worked except for the route not being calculated which you solved, so I reinstalled his version and now it just crashes, not sure what to do?